skip to main text

Printing the Nozzle Check Pattern

Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.

Watch the movie

Note

  • If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Refill any ink tanks that are low.

You need to prepare: a single sheet of A4 or Letter-sized plain paper

  1. Make sure that the power is turned on.

  2. Load a single sheet of A4 or Letter-sized plain paper in the rear tray.

  3. Pull out the paper output tray, then open the output tray extension.

  4. Hold down the RESUME/CANCEL button until the POWER lamp flashes twice, then release it immediately.

    The nozzle check pattern will be printed.

    Do not perform any other operations until the printer completes the printing of the nozzle check pattern.

  5. Examine the nozzle check pattern.